null
Free Same Day Shipping Over $75 *Restrictions Apply
Free Same Day Shipping Over $75 *Restrictions Apply
15% Off All Flags!
Ships via Freight
Ships via Freight

Sovereignty Series 20ft Commercial Flagpole - .188in Wall Thickness - 5in Butt Diameter

American Flagpole
SKU:
USA_ISW20D51
Made in the USA
$2,201.99 - $2,661.99
Availability:
In Stock: Ships in 3 to 4 weeks
Low Stock!
Available
  • Made In
    USA

  • Shipping
    With Tracking

  • Secure
    Payments

  • 141K+ Happy
    Customers

20' Commercial Flagpole from Concord American Flagpole - Sovereignty Series

Another commercial flagpole in the Sovereignty Series from Concord American Flagpole, these are top-tier products that spare no expense. The fine folks at Concord American Flagpole pride themselves on using expertise and the latest in aluminum manufacturing technologies while following some of the most strict inspection processes. What you get with their products is a well-tested piece of modern equipment made with care, attention to detail, and strength. They even offer a limited lifetime warranty to back them up. 

This one-piece internal halyard commercial flagpole comes with a taper of 5 inches at the bottom to 3 inches at the top. It features a wall thickness of 0.188 of an inch with an installation depth of 2ft, leaving you with 20ft of flagpole reaching the sky. Coming with a complete internal halyard assembly that includes wire cable, stainless steel swivel flag snaps, snap covers, a coated counterweight, and a beaded retainer ring. This is going to ensure that your flag stays in place and does so without the excess noise you would get with an external halyard system. This flagpole comes with a removable hand crank and stainless steel winch assembly making sure that the only person who has access to your flagpole is you. It also features a flush-mount access door with two (2) tamper-proof screws for added security. 

Along with what makes this flagpole special, you also get a great set of standard accessories that come with it. A cast aluminum revolving truck with dual sealed stainless steel bearing assemblies takes care of the top to keep your flag from getting tangled up in the wind. A gold anodized aluminum ball shines from up high, adding to the flagpole's attractive look with the bottom donning an aluminum flash collar. For installation, a galvanized 16-gauge corrugated steel ground sleeve with a steel grounding spike is included to give this flagpole a safe and sound home in the ground. It also features a windspeed rating of up to 182 miles per hour with a flag and 287 miles per hour without one.  If you have been looking for a commercial flagpole that's going to fit the bill and not leave you high and dry, the 20ft Sovereignty Series D51 from Concord American Flagpole is it. This flagpole is proudly made in the U.S.A. and comes with a limited lifetime warranty. 

The standard size flag for this flagpole is going to be 3ft by 5ft up to 4ft by 6ft. 

Max Wind Speed With Nylon Flag: 182 mph
Max Wind Speed No Flag: 287 mph

Product Features:

  • Patented, Heavy-Duty Gold Anodized Aluminum Ball
  • Cast Aluminum Revolving Truck with Dual SEALED Stainless Steel Bearing Assemblies, Aluminum Spindle, Cast Brass Exit Bushing and Removable Hood
  • Complete Internal Halyard Assembly
    - Wire Halyard Cable Assembly
    - Flag Arrangement (8' x 12' and Larger Flags Include Heavy-Duty Shock Spring Assembly)
    - Two (2) Stainless Steel Swivel Flagsnaps
    - Two (2) Neoprene Flagsnap Covers
    - Patented, Plastic Coated Counterweight
    - Beaded Retainer Ring Assembly
  • Stainless Steel Winch Assembly with Removable Hand Crank
  • Reinforced Raised Door Frame
  • Flush Mount Access Door with two (2) Tamper Proof Screws
  • Spun Aluminum FC-11 Flash Collar
  • Galvanized 16-Gauge Corrugated Steel Ground Sleeve with Steel Grounding Spike
  • Limited Lifetime Warranty

The standard finish for this flagpole is going to be a satin finish, but this flagpole is available in some other finishes as well. This is going to include an anodized bronze, black and clear along with a powder coat bronze, black, clear, and white.

Available Finishes: 

  • Anodized Bronze
  • Anodized Black
  • Powder Coat Bronze
  • Powder Coat Black
  • Powder Coat White
  • Powder Coat Clear
  • Satin
  • Anodized Clear

About Concord American Flagpole - Proudly Made in the USA Flagpoles

Concord American Flagpole has a long history of providing top-notch aluminum flagpoles and has been doing this for over 70 years. As a leading manufacturer and distributor of flagpoles and flagpole components, they are proud to offer the best value with their products. Their flagpoles are made in the U.S.A, and use some of the latest innovations in flagpole manufacturing and technology along with some of the best industry professionals from all around the world.

About the Sovereignty Series Flagpoles 

The Sovereignty Series from Concord American Flagpoles is the ideal choice for projects that require a commercial-grade flagpole with an internal halyard winch and wire cable system. Available in butt diameters from 5" to 7" and heights from 20' to 40', the raised reinforced door frame design provides maximum strength and security, while the internal halyard system ensures reliable durability even in moderate wind speed areas. This series is sure to make a statement for years to come.

FAQ - Concord American Flagpoles

Q: Will my flagpole come with a warranty? 

Concord American Flagpole stands by the superior quality of its aluminum flagpole shafts with a limited lifetime warranty. Through a combination of cutting-edge manufacturing technologies and exceptional engineering and design, Concord American Flagpole provides the most reliable flagpole products on the market. They write on their website, "We truly believe in the longevity and durability of our aluminum flagpole assemblies, and are proud to offer the flagpole industry’s first Lifetime Flagpole Shaft Warranty.
(Residential Flagpole Kits excluded.)"

Q: Where can I install a Concord Flagpole? 

A: These flagpoles are perfect for residential or business settings, memorials, parks, corporate and government buildings, along with a host of other settings. Their reputation for excellence and their products are often asked for by name by contractors and architects. This has helped to make them one of the most respected and requested names in the flagpole industry.

Q: What is the material used for flagpoles manufactured by Concord American Flagpole? 

A: Concord American Flagpole follows a rigorous quality assurance system that starts with exacting raw material specifications. All aluminum shafts are constructed from 6063-T6 temper aluminum alloy with a tensile strength of not less than 30,000 psi and a yield point of 25,000 psi, in accordance with ASTM B221 standards. Furthermore, all component parts are inspected strictly according to a set of predetermined standards, guaranteeing a level of quality that can only be found with Concord American Flagpole.

Q: Are the flagpoles easy to maintain?

A: Yes, flagpoles from Concord American Flagpole are designed for easy maintenance. The materials used in their construction are resistant to rust, fading, and corrosion. Regular cleaning and basic maintenance are usually sufficient to keep your flagpole in great condition.

  • Patented, Heavy-Duty Gold Anodized Aluminum Ball
  • Cast Aluminum Revolving Truck with Dual SEALED Stainless Steel Bearing Assemblies, Aluminum Spindle, Cast Brass Exit Bushing and Removable Hood
  • Complete Internal Halyard Assembly
    - Wire Halyard Cable Assembly
    - Flag Arrangement (8' x 12' and Larger Flags Include Heavy-Duty Shock Spring Assembly)
    - Two (2) Stainless Steel Swivel Flagsnaps
    - Two (2) Neoprene Flagsnap Covers
    - Patented, Plastic Coated Counterweight
    - Beaded Retainer Ring Assembly
  • Stainless Steel Winch Assembly with Removable Hand Crank
  • Reinforced Raised Door Frame
  • Flush Mount Access Door with two (2) Tamper Proof Screws
  • Spun Aluminum FC-11 Flash Collar
  • Galvanized 16-Gauge Corrugated Steel Ground Sleeve with Steel Grounding Spike
  • Limited Lifetime Warranty
Width:
1.00 (in)
Height:
1.00 (in)
Depth:
1.00 (in)
Clearance:
Non-Clearance
Country Of Origin:
United States
Season:
Everyday
Butt Diameter:
5in
Exposed Height:
20ft
Flagged Windspeed:
183 MPH
Top Diameter:
3in
Unflagged Windspeed:
255 mph
Wall Thickness:
.188in
Product Type:
Flagpoles
Color:
Black Anodized
Color:
Bronze Powder Coat
Color:
Bronze Anodized
Color:
Satin
Color:
Clear Powder Coat
Color:
Powder Coat White
Color:
Black
Color:
Clear Anodized
HR-CX:
true
_PDF:
isw20d51-spec|pdf|Specification Sheet
__badge:
Ships via Freight
_PDF:
internal-wire-halyard-instructions|pdf|Internal Wire Halyard Instructions

You May Also Like


People Also Bought