-
Details
This is the lowest cost one piece flagpole, and is suitable for less windy areas. This great value flagpole is our best seller! Please check the wind rating is high enough for your area and size of flag.
External Halyard Ground Set Cone Tapered Aluminum Flagpoles
Standard Accessories (Click below to see):
- Gold Anodized Aluminum Ball Ornament
- Cast Aluminum Stationary Truck with Pulley
- Solid Braided Polypropylene Halyard
- Cast Aluminum Cleat with Mounting Screws
- Nickel Plated Swivel Snap
- Vinyl Snap Cover
- Steel Foundation Sleeve
- Flash collar NOT included as standard equipment for this series
Please select flagpole finish. The standard is satin. We also offer clear, bronze and black anodized available at extra cost.These poles are shipped by special trucks from locations in Wisconsin, Florida and Maryland. Due to length, shipping costs vary from less than $100 to over $300. Our Checkout system is not able to calculate shipping costs. You will be contacted after you place the order with exact costs to your location. You may cancel your order without charge at that point if the costs are not acceptable.
-
Warranty Information
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Butt Diameter 4in Exposed Height 30ft Flagged Windspeed 50 MPH Overall Height 33ft Size 30ft Top Diameter 2.375in Unflagged Windspeed 88 MPH Wall Thickness .125in Features External Halyard Features Stationary Truck Type Aluminum Type Commercial Type Traditional Product Type Flagpoles Color Black Color Clear Color Bronze Color Satin Recommended Uses industry-use.png Recommended Uses park-use.png Recommended Uses commercial-use.png Recommended Uses shopping-use.png Recommended Uses windy-use.png Recommended For Industrial/Factory Recommended For Parks Recommended For Commercial/Office Recommended For Shopping Centers Recommended For Windy Mild/Moderate Right Overlay Image ws-med_USF_prod.png Left Overlay Image Made_in_USA_USF_prod.png Brand Eder -
1 Review
1 Review
-
beautiful
I installed this pole July 6th 2017, along with a 5x8 tough flag. I have clay so hard that you cant dig in my yard. knowing this I used a rather unorthodox means of installing my pole but it is perfectly plumb and after two years of torrential rains and brutal summer storms and winter winds, both the pole and flag have held up remarkably well. Nothing has been changed on the entire pole set up since installation. this being the beginning of the third year, I'm going to replace the halyard and flag to avoid failure. This is an exceptional pole for the person who wants something other than a basic pole. my 30' pole is perfect for my yard. have had many compliments! pole was easy to assemble and has not changed in appearance from new. Black pole and Black halyard does not distract from the intended focus of the Flag! couldn't be happier with my choice or the quality of the pole!
-
External Halyard Ground Set Cone Tapered Aluminum Flagpoles
Standard Accessories (Click below to see):
- Gold Anodized Aluminum Ball Ornament
- Cast Aluminum Stationary Truck with Pulley
- Solid Braided Polypropylene Halyard
- Cast Aluminum Cleat with Mounting Screws
- Nickel Plated Swivel Snap
- Vinyl Snap Cover
- Steel Foundation Sleeve
- Flash collar NOT included as standard equipment for this series
Please select flagpole finish. The standard is satin. We also offer clear, bronze and black anodized available at extra cost.
These poles are shipped by special trucks from locations in Wisconsin, Florida and Maryland. Due to length, shipping costs vary from less than $100 to over $300. Our Checkout system is not able to calculate shipping costs. You will be contacted after you place the order with exact costs to your location. You may cancel your order without charge at that point if the costs are not acceptable.
Clearance | Non-Clearance |
---|---|
Country Of Origin | United States |
Season | Everyday |
Butt Diameter | 4in |
Exposed Height | 30ft |
Flagged Windspeed | 50 MPH |
Overall Height | 33ft |
Size | 30ft |
Top Diameter | 2.375in |
Unflagged Windspeed | 88 MPH |
Wall Thickness | .125in |
Features | External Halyard |
Features | Stationary Truck |
Type | Aluminum |
Type | Commercial |
Type | Traditional |
Product Type | Flagpoles |
Color | Black |
Color | Clear |
Color | Bronze |
Color | Satin |
Recommended Uses | industry-use.png |
Recommended Uses | park-use.png |
Recommended Uses | commercial-use.png |
Recommended Uses | shopping-use.png |
Recommended Uses | windy-use.png |
Recommended For | Industrial/Factory |
Recommended For | Parks |
Recommended For | Commercial/Office |
Recommended For | Shopping Centers |
Recommended For | Windy Mild/Moderate |
Right Overlay Image | ws-med_USF_prod.png |
Left Overlay Image | Made_in_USA_USF_prod.png |
Brand | Eder |
1 Review
-
beautiful
I installed this pole July 6th 2017, along with a 5x8 tough flag. I have clay so hard that you cant dig in my yard. knowing this I used a rather unorthodox means of installing my pole but it is perfectly plumb and after two years of torrential rains and brutal summer storms and winter winds, both the pole and flag have held up remarkably well. Nothing has been changed on the entire pole set up since installation. this being the beginning of the third year, I'm going to replace the halyard and flag to avoid failure. This is an exceptional pole for the person who wants something other than a basic pole. my 30' pole is perfect for my yard. have had many compliments! pole was easy to assemble and has not changed in appearance from new. Black pole and Black halyard does not distract from the intended focus of the Flag! couldn't be happier with my choice or the quality of the pole!