-
Details
The OTH Flagpole Truck available at United States Flag Store is made of cast aluminum and includes a nylon pulley on 1/4" stainless steel axle. Designed to slip over the top of the flagpole, this stationary truck and pulley is then secured by stainless steel set screws. Designed for residential flagpoles that are 2 inches in diameter, the flagpole truck's top can accommodate an ornament with a spindle. It is secured to the truck with a stainless-steel pan head screw. Accepts spindle threading of 1/2" - 13NC on ornaments. The maximum diameter of the halyard is 5/16". Made in the U.S.A., the flagpole truck will ship within two business days when you order from United States Flag Store.
-
Additional Information
Clearance Non-Clearance Color Name Silver Country Of Origin United States Season Everyday Product Type Trucks Product Type Flagpole Accessories Left Overlay Image Made_in_USA_USF_prod.png Brand Super Tough -
20 Reviews
20 Reviews
-
Seems like it will work just fine
Seems like it will work just fine
-
OTH Flagpole Truck
Arrived quicker, packaged securely. Seems like it should last quite sometime. Only time will tell though. Easy to install and fit my flagpole nicely. So far I am happy with purchase and would order from this company again.
-
Great product.
Fit perfectly and accepted the ball I had purchased. Can't ask for more than that!
-
It’ll do the job
Not as heavy as I would have liked, but is sufficient to do the job.
-
Pulley is a weak point!
The nylon pulley binds when pulling the rope up or down. You must "work it" to keep it centered or you cannot raise or lower the flag. I had a similar pulley system on a previous flag pole and had to replace it almost immediately.
-
Quality
This is exactly as described. Very good quality of construction. Well drilled and tapped with excellent hardware. Buy it!
-
Big improvement over what was on my flagpole.
The truck that was on my pole was made out of plastic and held on with steel screws, which eventually rusted, and the whole thing fell off. This truck looks like it should be there a long time. I did modify it a bit to make it a bit more tight to the pole. I drilled and tapped two more holes for two more set screws and used loctite on them. Great product ! Even if you don't want to go to the extra trouble of drilling more holes, it should be fine. I just wanted to make sure it wasn't going anywhere.
-
Good price but...
It's a simple Truck and it works. Too bad the manufacturer didn't include 3 set screws as opposed to one as with just the single set screw this truck rocks from side to side. For the negligible cost of providing 3 set screws (120 degree out from each other) I would have given a 5
-
Very good
Good fit and quality
-
The OTH Flagpole Truck available at United States Flag Store is made of cast aluminum and includes a nylon pulley on 1/4" stainless steel axle. Designed to slip over the top of the flagpole, this stationary truck and pulley is then secured by stainless steel set screws. Designed for residential flagpoles that are 2 inches in diameter, the flagpole truck's top can accommodate an ornament with a spindle. It is secured to the truck with a stainless-steel pan head screw. Accepts spindle threading of 1/2" - 13NC on ornaments. The maximum diameter of the halyard is 5/16". Made in the U.S.A., the flagpole truck will ship within two business days when you order from United States Flag Store.
Clearance | Non-Clearance |
---|---|
Color Name | Silver |
Country Of Origin | United States |
Season | Everyday |
Product Type | Trucks |
Product Type | Flagpole Accessories |
Left Overlay Image | Made_in_USA_USF_prod.png |
Brand | Super Tough |
20 Reviews
-
Seems like it will work just fine
Seems like it will work just fine
-
OTH Flagpole Truck
Arrived quicker, packaged securely. Seems like it should last quite sometime. Only time will tell though. Easy to install and fit my flagpole nicely. So far I am happy with purchase and would order from this company again.
-
Great product.
Fit perfectly and accepted the ball I had purchased. Can't ask for more than that!
-
It’ll do the job
Not as heavy as I would have liked, but is sufficient to do the job.
-
Pulley is a weak point!
The nylon pulley binds when pulling the rope up or down. You must "work it" to keep it centered or you cannot raise or lower the flag. I had a similar pulley system on a previous flag pole and had to replace it almost immediately.
-
Quality
This is exactly as described. Very good quality of construction. Well drilled and tapped with excellent hardware. Buy it!
-
Big improvement over what was on my flagpole.
The truck that was on my pole was made out of plastic and held on with steel screws, which eventually rusted, and the whole thing fell off. This truck looks like it should be there a long time. I did modify it a bit to make it a bit more tight to the pole. I drilled and tapped two more holes for two more set screws and used loctite on them. Great product ! Even if you don't want to go to the extra trouble of drilling more holes, it should be fine. I just wanted to make sure it wasn't going anywhere.
-
Good price but...
It's a simple Truck and it works. Too bad the manufacturer didn't include 3 set screws as opposed to one as with just the single set screw this truck rocks from side to side. For the negligible cost of providing 3 set screws (120 degree out from each other) I would have given a 5
-
Very good
Good fit and quality