This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
The Valley Forge Koralex II American Flag is made of spun polyester and is incredibly durable. The material used to make the flag has an open weave which reduces fabric stress and helps resist high winds. Koralex II flags are the perfect choice for business that will fly the flag 24/7 or in an areas with high wind speeds. The flag is made from heavyweight material and will require more wind to fly than lighter nylon flags.
The Koralex II American flag is made by Valley Forge. They are made for outdoor use and will resist fading and fraying. The flags look like heavyweight cotton and are made with sewn stripes and appliquéd stars. The headers are reinforced with canvas material and metal D-rings. Six rows of stitching help the flag maintain its good looks.
Features:
- Made with spun polyester, most durable flag material available
- 100% Made in the USA
- Resists high winds, best choice for coastal & high wind areas
- Resists fading & fraying, ultimately extending the life of the flag
- Features sewn stripes and appliqué stars
- Finished with a canvas roped heading and metal thimbles for added support
Because of the nature of the Super Tough material, flags may be slightly longer than the size specified.
Also consider Nylon US Flags, which are lighter to handle and fly in lower wind speeds. They are also significantly less money to buy. On the other hand, a nylon flag will fray before a spun polyester flag.
US Flag Compare prices, durability, appearance
Top Header for 12ft x 18ft flags:
A top header is needed for displaying the flag in a horizontal position. A tough, white canvas header is added across the top of the flag that has heavy-duty grommets every 4 feet. Perfect for displaying indoors or outdoors.
Top Headers take approximately 14 business days to ship. Flags with headers are non-refundable and non-returnable. No exceptions.
Fly End Corners
Steel-reinforced rope loops are added to the top right and bottom right corner of the flag. Perfect for displaying on the sides of buildings, etc. Fly end corners are sewn by our seamstress and take 10-12 business days to ship. Flags with fly end corners are non-refundable and non-returnable.
-
Warranty Information
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Material Sewn Polyester Size 12ft x 18ft Common Filters Country References United States Type Outdoor Left Overlay Image Made_in_USA_USF_prod.png Product Type Spun Poly Flags Brand Valley Forge -
3 Reviews
3 Reviews
-
Flag
So far, the flag looks great and appears to be holding up to southern Colorado winds. Very pleased with the ordering process, delivery, and quality of material. Plan to order a second flag to have on hand.
-
Good Material but problems
We had some donors buy a new flag for our National Military History Center. It was delivered and given to us in November. In December, we took the flag down and properly stored it. This May we flew it again. In three weeks we noticed that the stripes were starting to seperate. This hopefully is just a manufacturer problem to fix, but this is not a very good amount of time for a flag to fly. It is an embaressment to our Musuem Honoring the Veterans of all Wars. Hopefully we can get some help to replace this flag honoring our Military Men and Women that serve now and then.
-
We have purchased several of...
We have purchased several of these flags for their longevity; but the last purchase life was only about 4-months before a tear occured. Not discouraged we are buying anther today 10/12/2011 LWO (Bradenton, FL)
-
The Valley Forge Koralex II American Flag is made of spun polyester and is incredibly durable. The material used to make the flag has an open weave which reduces fabric stress and helps resist high winds. Koralex II flags are the perfect choice for business that will fly the flag 24/7 or in an areas with high wind speeds. The flag is made from heavyweight material and will require more wind to fly than lighter nylon flags.
The Koralex II American flag is made by Valley Forge. They are made for outdoor use and will resist fading and fraying. The flags look like heavyweight cotton and are made with sewn stripes and appliquéd stars. The headers are reinforced with canvas material and metal D-rings. Six rows of stitching help the flag maintain its good looks.
Features:
- Made with spun polyester, most durable flag material available
- 100% Made in the USA
- Resists high winds, best choice for coastal & high wind areas
- Resists fading & fraying, ultimately extending the life of the flag
- Features sewn stripes and appliqué stars
- Finished with a canvas roped heading and metal thimbles for added support
Because of the nature of the Super Tough material, flags may be slightly longer than the size specified.
Also consider Nylon US Flags, which are lighter to handle and fly in lower wind speeds. They are also significantly less money to buy. On the other hand, a nylon flag will fray before a spun polyester flag.
US Flag Compare prices, durability, appearance
Top Header for 12ft x 18ft flags:
A top header is needed for displaying the flag in a horizontal position. A tough, white canvas header is added across the top of the flag that has heavy-duty grommets every 4 feet. Perfect for displaying indoors or outdoors.
Top Headers take approximately 14 business days to ship. Flags with headers are non-refundable and non-returnable. No exceptions.
Fly End Corners
Steel-reinforced rope loops are added to the top right and bottom right corner of the flag. Perfect for displaying on the sides of buildings, etc. Fly end corners are sewn by our seamstress and take 10-12 business days to ship. Flags with fly end corners are non-refundable and non-returnable.
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Season | Everyday |
| Material | Sewn Polyester |
| Size | 12ft x 18ft |
| Common Filters | Country |
| References | United States |
| Type | Outdoor |
| Left Overlay Image | Made_in_USA_USF_prod.png |
| Product Type | Spun Poly Flags |
| Brand | Valley Forge |
3 Reviews
-
Flag
So far, the flag looks great and appears to be holding up to southern Colorado winds. Very pleased with the ordering process, delivery, and quality of material. Plan to order a second flag to have on hand.
-
Good Material but problems
We had some donors buy a new flag for our National Military History Center. It was delivered and given to us in November. In December, we took the flag down and properly stored it. This May we flew it again. In three weeks we noticed that the stripes were starting to seperate. This hopefully is just a manufacturer problem to fix, but this is not a very good amount of time for a flag to fly. It is an embaressment to our Musuem Honoring the Veterans of all Wars. Hopefully we can get some help to replace this flag honoring our Military Men and Women that serve now and then.
-
We have purchased several of...
We have purchased several of these flags for their longevity; but the last purchase life was only about 4-months before a tear occured. Not discouraged we are buying anther today 10/12/2011 LWO (Bradenton, FL)
